Top-Trusted Commercial Paving Contractors in Uxbridge

OUR IMPACT

Long lasting asphalt starts with a solid sub-base.

We specialize in:

Parking Lots
Plazas
Industrial Buildings
Apartment Complexes
Estate Properties
Roadwork
Mill & Pave

Restoration
Sub-divisions
Shopping Centres
Commercial Lots
Golf Courses
Schools
Overlays

Similar to a home’s or building’s foundation, a solid and sturdy base prevents movement and shifting beneath the asphalt’s surface. Seal Canada’s commercial paving contractors put just as much attention on the sub-base as it does on the asphalt above it.

It starts with adding and grading existing gravel to ensure a consistent slope. The sub base is thoroughly compacted and, in some cases, left to settle (if necessary).

On all commercial paving projects, two separate layers of asphalt are put down: a base coat consisting of HL 8 (A thicker stoned rugged asphalt to act as a tough base coat), and a finish coat consisting HL 3 (a durable asphalt with a smoother surface). Two thick coats ensure maximum durability and longevity. A base coat of 2” of HL8 and a finish coat of 2” of asphalt are put down standard with all our commercial paving projects totaling 4 inches of asphalt, unless specific projects require more or thicker layers.

Call Uxbridge’s #1 Commercial Paving Contractors For A Site Assessment Today!

Our Uxbridge commercial paving team carefully goes through every step of this process to ensure it’s done right the first time, guaranteeing our clients pavement that lasts. Attention to detail is the key to ensuring the paved area is sloped correctly, allowing for water to drain to designated draining areas, eliminating pooling and hazards. Proper compaction ensures solid, long-lasting asphalt with a smooth and even surface.

Start To Finish

Our Paving Process

Thoroughly assess site, locate drainage points, and identify potential problem areas.
Excavate and remove existing asphalt (if applicable).
Grade sub-base by adding gravel where needed and creating the required slope.
Compact sub-base thoroughly (allow sub-base to sit if necessary).
Pave HL8 basecoat following required grades.
Compact base coat thoroughly using roller.
Pave HL3 finish coat, following grades.
Compact area thoroughly using rollers.
Final assessment: check drainage and grades; determine if touch ups are required.
Block off paved areas to prevent vehicular traffic during the curing period.